Wallpaper test 1

Choosing the perfect design for your feature wall is exciting, but selecting the right material is what ensures a flawless, long-lasting result.

All of our custom-sized wallpapers and murals are printed to order in high definition across 4 distinct, premium material types.

Whether you are looking for an easy DIY peel-and-stick update, a washable bathroom-friendly surface, or a luxurious traditional installation, here is a quick summary to help you choose:

Wall Compatibility & Disclaimer

Please read before purchasing or installing Peel & Stick (Self-Adhesive) Wallpaper:

Peel & Stick wallpaper relies on direct surface contact to form a strong adhesive bond. It requires a clean, smooth, dry, and properly cured painted surface to stick correctly.

Why Peel & Stick Vinyl May Not Adhere Properly:

• Rough, Bumpy, or Textured Walls: Rough-cast plaster, orange-peel textures, or heavily textured paint create air pockets underneath the vinyl, drastically reducing contact area and causing edges to lift.

• Freshly Painted Walls: Paint takes 14 to 30 days to fully outgas and cure underneath the surface layer. If vinyl is applied too early, trapped paint gases will break down the adhesive, causing the wallpaper to bubble or peel off entirely.

• Teflon / Washable / Stain-Resistant Paints: Modern "washable" or low-VOC interior paints contain silicone or Teflon additives specifically formulated to repel substances—including self-adhesive vinyl glue.

• Dusty, Chalky, or Unsealed Surfaces: Unsealed plaster or dusty, chalky paint acts as a barrier, sticking to the glue instead of allowing the glue to grip the wall.

Recommended Fixes to Ensure Proper Adhesion:

1. Sand & Seal Unfinished/Bumpy Walls: Always sand down rough bumps and apply an acrylic wallpaper primer/sealer 24–48 hours before installing self-adhesive wallpaper.

2. The Wood Glue / Diluted PVA Technique: For tricky, slightly textured walls or stubborn seam edges, you can brush a thin layer of diluted clear wood glue (PVA glue) or vinyl primer onto the wall surface. Allow it to become tacky before pressing the wallpaper down for an extra-strong bond.

3. Heat-Activate the Adhesive: Use a hair dryer on a warm setting over stubborn edges while smoothing down with a squeegee to soften the vinyl glue and make it grip tight.

Smooth Matte Peel & Stick

If you love a soft, modern, and glare-free look, our Smooth Matte Peel & Stick wallpaper is our most popular and budget-friendly choice. It functions like a giant, high-precision sticker—making installation clean, fast, and mess-free.

Specifications & Features:

• Application Method: Self-Adhesive (Peel & Stick backing).

• Finish & Texture: Soft-touch, non-glare smooth matte finish.

• Durability: 100% Waterproof & Washable.

• Renter Friendly: Fully removable and repositionable on properly prepped, cured walls.

Best Used For:

• Budget-friendly DIY makeovers and feature walls.

• Rental properties, nurseries, and kids' bedrooms.

• Moisture-prone areas like kitchens and guest bathrooms.

⚠️ Installation Warnings:

• Wall Surface Requirement: Surface MUST be completely smooth, flat, and dust-free. Will NOT adhere to rough, bumpy, or textured walls.

• Cure Time: Freshly painted walls must cure for at least 14–30 days before application.

Installation Guide:

1. Prep Wall: Clean dust and grease with a damp cloth; allow to dry completely. (Fresh paint must cure for 14–30 days).

2. Plumb Line: Draw a straight vertical reference line on your wall using a spirit level.

3. Peel & Place: Peel 15–20 cm of backing paper from top and align with your vertical line (leave 3–5 cm ceiling excess for trimming).

4. Smooth Down: Smooth outward from center with a squeegee while peeling down the backing paper.

5. Align & Trim: Match next panels visually and trim top/bottom excess using a sharp utility blade.

Textured Peel & Stick | Paper | Canvas

For those wanting the convenience of peel-and-stick combined with a tactile, high-end artistic finish, our Textured Peel & Stick range delivers an elevated luxury feel.

Specifications & Features:

• KOZO Raw Fibre: Inspired by Japanese handmade Washi paper, featuring an organic, raw-fibre relief pattern.

• ARTEX Canvas: Mimics the rich texture of traditional artist canvas, adding depth and painterly character to murals.

• Application Method: Self-Adhesive (Peel & Stick / repositionable wet or dry application).

• Finish & Texture: Thick, commercial-grade PVC with prominent embossed texture.

• Durability: Waterproof, heavy-duty, scuff-resistant, and washable.

• Renter Friendly: Easy to peel off and reposition during installation; leaves walls intact upon removal.

Best Used For:

• Hiding subtle surface imperfections thanks to the thick, textured depth.

• High-end living rooms, master bedrooms, and boutique commercial spaces.

• DIY decorators seeking a high-end, installer-quality result with simple self-adhesive handling.

⚠️ Installation Warnings:

• Surface Preparation: Requires a clean, smooth, properly sealed wall for optimal adhesion.

• Cure Time: Fresh paint must cure for 14–30 days before installing.

Installation Guide:

1. Prep Wall: Clean wall thoroughly. Fill and sand any deep cracks.

2. Plumb Line: Draw a straight vertical line using a spirit level for your first drop.

3. Peel & Apply: Peel 15 cm of backing paper from top, align along plumb line, and stick firmly.

4. Smooth Out: Use a soft squeegee or cloth to smooth out bubbles from center to edges.

5. Match & Trim: Align pattern seams (built-in overlap margin makes matching simple) and trim top and bottom excess with a sharp blade.

DuraMatte Fabric Wallpaper

Designed for permanent, designer-grade installations, DuraMatte Fabric Wallpaper offers an opulent woven textile feel. This commercial-grade material brings sophisticated warmth and subtle depth to luxury interiors.

Specifications & Features:

• Application Method: Requires heavy-duty wallpaper paste/glue (Paste-The-Wall).

• Finish & Texture: Woven fabric surface with a rich, soft-touch matte appearance.

• Durability: Commercial-grade strength, highly durable, waterproof, and washable.

• Installation Level: Recommended for professional installers or experienced decorators looking for a permanent finish.

Best Used For:

• Luxury homes, hotel suites, dining rooms, and high-traffic commercial interiors.

• Large feature walls where maximum durability and seam invisibility are required.

Installation Guide:

1. Prep & Prime: Ensure wall is clean, smooth, and dry. Apply wallpaper primer for best adhesion.

2. Apply Adhesive: Roll heavy-duty non-woven adhesive directly onto wall surface one panel width at a time.

3. Hang Panel: Place dry fabric panel into wet adhesive along your vertical plumb line.

4. Butt-Join Seams: Align subsequent panels edge-to-edge without overlapping and press edges gently with a seam roller.

5. Clean & Trim: Immediately wipe off any paste on the front surface with a damp sponge and trim excess with a fresh utility blade.

Traditional Non-Woven Paper

Our Traditional Non-Woven Paper is the classic choice for lovers of classic interior craftsmanship. Lightweight, breathable, and smooth to the touch, it provides the timeless charm of traditional paper wallpaper.

Specifications & Features:

• Application Method: Requires standard non-woven wallpaper paste/glue (Paste-The-Wall).

• Finish & Texture: Classic smooth paper finish with a natural matte sheen.

• Care Instructions: Wipeable with a damp cloth (not fully waterproof or scrubbable).

• Installation Level: Traditional paste application.

Best Used For:

• Dry residential spaces like main bedrooms, hallways, dining rooms, and home offices.

• Traditional or vintage-style wall decor projects.

Installation Guide:

1. Prep Wall: Fill cracks, sand smooth, and ensure wall is clean and dust-free.

2. Apply Adhesive: Brush or roll wallpaper paste directly onto the wall surface.

3. Hang Dry Paper: Place paper panel directly onto wet wall paste using a plumb line for alignment.

4. Seam Adjustment: Slide paper slightly in wet paste to butt-join seams edge-to-edge smoothly.

5. Wipe & Trim: Wipe away any excess paste immediately with a damp cloth and trim top and bottom margins with a sharp blade.